Getting Started with Broadcaster Only

to stream from zixi on air pro to your broadcaster, you must first enable the broadcaster to receive the input you must have access to a running zixi broadcaster if you are activating your broadcaster for the first time, see installing zixi products docid\ vr8wiz4ksrwxsz52cx w you can manually create a push input on your broadcaster this input uses the zixi protocol add a push input to your broadcaster open your zixi broadcaster in the top navigation, select inputs on the inputs screen, select + new input in the stream id field, enter a name that you will use to identify the stream sent from your on air pro app (make a note of the stream id (case sensitive) you will enter this as the stream id in the app settings ) in the stream type selection, select the push radio button (default) in the stream parameters section, in the password field, you can add a password for increased security (make a note of the password (case sensitive) you will enter this as the password in the app settings ) configure additional settings as necessary click ok the new input is added to the zixi broadcaster and now appears in the list of available streams on the inputs screen the status should be offline (blue) get the broadcaster ip address get the public ip address for your zixi broadcaster you will use this to populate the host field in the app add a new connection on your apple device, open the zixi on air pro app in the top left, tap the gear icon in settings , tap connections tap the + icon to create a new connection enter the following information name – give the connection a name stream id – give the stream id a name this will be used to create a temporary input on your broadcaster (e g onair app) host – enter the public ip address for the broadcaster (e g 172 217 22 14) port – leave the default, or set the broadcaster server port which allows push inputs 2088 – non encrypted 7088 – protected by dtls password – optional enter the password set on the broadcaster input ignore dtls certificate errors – turn on to enable required with port 7088 and fully qualified domain name tap add to create the connection navigate back to the video screen in audio settings , you may want to toggle stereo mode on start streaming in the on air pro app, navigate back to the camera press the red button to start streaming in zixi broadcaster, you should now see your new input