Zixi Broadcaster/ZEC v18 Docum...
...
Broadcaster Network Bonding
Broadcaster Output with Network Bonding
1 min
a zixi broadcaster can push a stream to another zixi broadcaster that has been divided into multiple network channels by utilizing multiple nics the zixi broadcaster at the destination will subsequently reuniting them into a single input stream to add network bonding to a push output create a push output, by following the instructions in the docid\ nsqd917a5wh xggsccsrd section in the output parameters section, select the bond links checkbox in the links section, click the + button to add a second link in the host field, type the ip address of the destination zixi broadcaster in the port field, type the destination port number of the zixi broadcaster to which you want to stream default 2088 in the ip field, select the nic in the zixi broadcaster (source) that you want to use to stream in the max bitrate field, enter a value approximately 2x the average bitrate for the stream note the max bitrate parameter in a zixi push output is not enforced as a hard limit it is used as a guideline for transport, buffering, and pacing, but zixi does not actively throttle or drop packets to keep the stream below this value as a result, the actual bitrate may exceed the configured max bitrate, especially with variable bitrate content or bitrate bursts in the backup field, do one of the following if you want to use this link only if there is not enough bandwidth in the other links, select the backup checkbox if you want to use this link in parallel to other links, do not select the backup checkbox configure additional parameters as required click ok to save the zixi broadcaster output
