---
title: ZEC Broadcaster Output with Network Bonding
slug: zixi-broadcaster-zec-current-version/zec-broadcaster-output-with-network-bonding
docTags: 
createdAt: 2024-12-26T19:53:56.712Z
---

A ZEC can push a stream to a Zixi Broadcaster that has been divided into multiple network channels by utilizing multiple NICs. The Zixi Broadcaster at the destination will subsequently reuniting them into a single input stream. 

### To add network bonding to a Push Output:

::::WorkflowBlock
:::WorkflowBlockItem
Create a **Push Output** by following the instructions in the [ZEC Adding Push Outputs](docId\:l0BWR7dwYNKiLfWe6jStZ) section.
:::

:::WorkflowBlockItem
In the **Output Parameters** section, select the **Bond Links** checkbox.


![](https://api.archbee.com/api/optimize/yloo8L9Y5DmjuuW_iCtAX--frRjSMC_izvir4PVcOp6-20250323-162710.png)
:::

:::WorkflowBlockItem
In the **Links** section, click the **+** button to add a second link.
:::

:::WorkflowBlockItem
In the **Host** field, type the IP address of the destination Zixi Broadcaster.
:::

:::WorkflowBlockItem
In the **Port** field, type the destination port number of the Zixi Broadcaster to which you want to stream. Default: 2088
:::

:::WorkflowBlockItem
In the **Local IP** field, select the NIC in the ZEC (source) that you want to use to stream.
:::

:::WorkflowBlockItem
Configure additional parameters as required.
:::

:::WorkflowBlockItem
Click **OK** to save the ZEC Output.
:::
::::