---
title: Adding Pull Outputs
slug: zixi-broadcaster-v18/adding-pull-outputs
docTags:
createdAt: 2024-12-26T15:05:01.311Z
---
**To Create a Pull Output:**
::::WorkflowBlock
:::WorkflowBlockItem
In the Zixi Broadcaster Outputs page, click **\* New Output**. The New output window is displayed
:::
:::WorkflowBlockItem
Type the unique identifier for this output in the **Output Name**.
:::
:::WorkflowBlockItem
Select an **Input Stream** to be made available on this output from the drop-down list.
:::
:::WorkflowBlockItem
Select the Show in Matrix check box to display this stream in the Matrix (see [Using the Matrix](docId\:KyKY08NFFT6yGIZiGnhQ5) ). Default: Selected.
:::
:::WorkflowBlockItem
Select **Pull**.
:::
:::WorkflowBlockItem
Specify the **Output parameters** (see Output Stream Parameters Table below)
:::
:::WorkflowBlockItem
If you want to specify **Billing Codes** to identify and differentiate traffic on a Zixi Broadcaster for billing purposes, select this checkbox (see Output Stream Parameters Table below)
:::
:::WorkflowBlockItem
Click **OK**.
:::
::::
The new Pull Output with its settings is created and now appears on the screen.
## Output Stream Parameters Table
| **Parameter** | **Description** |
| -------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| Output Parameters |
|
| **Stream ID** | Specify the unique Stream ID that the remote Zixi Receiver/Broadcaster expects (recommended – identical to ‘Input Stream’). |
| **Remote ID** | Specify the Zixi Receiver ID (shown in the Zixi Receiver/Broadcaster **Status** window) that will be allowed to pull the stream. |
| **Password** | Specify a string that can be used to authenticate that the Zixi Receiver is authorized to pull this stream (Optional). |
| **Latency \[ms]** | Specify the buffer size that Zixi Broadcaster will be able to maintain for error correction.
For example, 6000 milliseconds would ensure that the stream is protected for six seconds of errors in the network.
Default: Remote configuration.B
Remote configuration – use the latency configured in the Zixi Receiver/Broadcaster. Otherwise use a value to override the value configured in the Zixi Receiver/Broadcaster. |
| ***Enable Encryption*** | Select this checkbox to encrypt the Output stream. |
| **Encryption type (for Encryption enabled)** | Specify the type of Encryption (AES 128/192/256). Click Generate to generate an encryption key or enter another encryption key. |
*The error recovery techniques implemented in the Zixi protocol Pull streams are protected under U.S. patent 11,546,615.*