---
title: Connecting a Stream from a Zixi-Enabled Device (Encoder UI)
slug: zen-master/connecting-a-stream-from-a-zixi-enabled-device-encoder-ui
docTags: 
createdAt: 2024-12-27T16:35:20.525Z
---

If you have added a source from a Zixi-enabled device, you will need to configure it on the encoder in order to connect it to ZEN Master. The UI structure varies for different Zixi-enabled encoders, however the following settings should be configured to connect to ZEN Master.

**To connect a Zixi-enabled encoder:**

1. In **ZEN Master**, in the main navigation, click **Sources**.
2. Select the relevant source from the list of Sources.
3. In the **Details** pane at the bottom of the screen, click the **Manual Configuration **tab.

This tab contains specific configuration settings for the selected Source. Use the values shown for the following parameters to configure the Zixi Enabled encoder:

| **Parameter** | **Description**                                             |
| ------------- | ----------------------------------------------------------- |
| **Host**      | The IP address/URL of the ZEN Master host.                  |
| **Password**  | The access password that has been configured in ZEN Master. |
| **Port**      | The port that has been configured in ZEN Master.            |
| **Stream ID** | The stream name.                                            |