---
title: Configuring a transcode profile in ZEN Master
slug: zen-master/configuring-a-transcode-profile-in-zen-master
createdAt: 2026-10-05T21:19:31.000Z
---

A transcode profile is a reusable set of encoding settings (codec, resolution, bitrate, audio). You create it once, then apply it to any transcoded source or channel. Changing a profile later affects every source that uses it.

## Before you start

- You need a ZEN Master user with permission to manage transcoding profiles.
- Know your target output: codec, resolution, frame rate and bitrate.
- Transcoding needs a Broadcaster with transcoding enabled in its license.

## Create a profile

1. Log in to ZEN Master.
2. In the left menu, go to **Transformation > Transcoding Profiles**.
3. Click **Add** (or **New Profile**).
4. Enter a **Name** that describes the output, for example 1080p30-h264-6M. The name is how you will find the profile when you build a source.

### Video

1. Leave **Transcode Video** on to re-encode, or turn it off to pass the original video through.
2. Choose the **Video Codec**: H.264 or H.265.
3. Choose the **Encoding Profile**. For H.264 this is Baseline, Main, High or High 10. Use High unless a downstream device needs something simpler.
4. Set the **Resolution** (width and height) and **Frame Rate**. Keep the source aspect ratio unless you need to change it.
5. Set the **Bitrate**. Choose **CBR** for a steady rate, or **VBR** with an average and a maximum.
6. Set the **GOP** (keyframe interval). A common choice is one keyframe every 1 to 2 seconds, for example 60 at 30 fps. Use closed GOP if the output feeds HLS or DASH packaging.

### Audio

1. Leave **Transcode Audio** on to re-encode, or turn it off to pass the original audio through.
2. Choose the **Audio Codec** (for example AAC), **Bitrate** and **Sample Rate**.

### Optional

1. To burn in a logo, enable **Logo Insertion**, upload the image and set its position, size and transparency.
2. Click **Save**.

## Use the profile

1. Go to **Sources** and create or edit a source.
2. Set the source type to **Transcoded**.
3. Choose the input (parent) source and select your profile in **Transcoding Profile**.
4. Save, then add the source to a channel or target as normal.

## Check it works

Open the new source and confirm it is **Running**. In the stream details, check that the output codec, resolution and bitrate match the profile.

## Tips

- Build one profile per rendition (for example 1080p, 720p, 480p) and reuse them across channels.
- A profile that is in use cannot be deleted. Remove it from the sources first.
- Editing a profile restarts the transcode on every source using it. Make changes during a quiet period.
- Hardware acceleration (GPU) needs a Broadcaster with a supported GPU. If you are unsure, leave it off.

## API

You can also manage profiles with the ZEN Master API (/transcoding\_profiles). See the ZEN Master API reference on the Zixi Customer Portal under Downloads.
