---
title: Remote SSH Connections
slug: how-to-guides/remote-ssh-connections
createdAt: 2024-12-16T20:06:08.935Z
---

For OS login, it is recommended to use passphrase protected SSH key pairs instead of passwords, and to not allow remote root login. To do this, take the following steps:

- Generate a passphrase-protected SSH key for each system that needs to access the server.
- Disable SSH password authentication.
- Disable root login.

Legacy Zixi Feeders & Receivers, ZEC and Zixi Broadcasters have a section under Settings that enables you to define reverse tunnels to a remote SSH server, in order to allow accessing the application through a secure SSH tunnel remotely. Make sure to stop/delete all tunnels if remote access is not desirable.

**To configure an SSH Tunnel in Legacy Zixi Feeder/Receiver:**

::::WorkflowBlock
:::WorkflowBlockItem
Go to **Settings > SSH Tunnels**.
:::

:::WorkflowBlockItem
In the **Server Connection** section configure the server connection, as described in the table below.

::Image[]{src="https://api.archbee.com/api/optimize/mzxtTQEvCNIdUNgF2kuwJ/P1-3FPjtRbf45GKtSSVCq_image.png" size="80" width="1241" height="491" position="center" showCaption="false"}
:::

:::WorkflowBlockItem
Click **Apply**.
:::

:::WorkflowBlockItem
In the **Reverse tunnels** section, click **Add**.
The **Tunnel details** dialog appears:

::Image[]{src="https://api.archbee.com/api/optimize/mzxtTQEvCNIdUNgF2kuwJ/7UJjvvtRH3mRvgO8rA90v_image.png" size="40" width="349" height="207" position="center" showCaption="false"}
:::

:::WorkflowBlockItem
In the **Remote Source Port** field, type the Remote Source Port that will be used to connect.
:::

:::WorkflowBlockItem
In the **Local Destination IP** field, type the IP address of the Zixi Feeder/Receiver.
:::

:::WorkflowBlockItem
In the **Local Destination Port** field, type the port number in the Zixi Feeder/Receiver for the specific reverse SSH tunnel.
:::

:::WorkflowBlockItem
Click **OK**.
:::
::::

**To configure an SSH Tunnel in Zixi Broadcaster:**

::::WorkflowBlock
:::WorkflowBlockItem
Go to **Settings > SSH Connections**.

::Image[]{src="https://api.archbee.com/api/optimize/mzxtTQEvCNIdUNgF2kuwJ/ARme6JKOn2vCWU8g634z9_image.png" size="90" width="1210" height="223" position="center" showCaption="false"}
:::

:::WorkflowBlockItem
Click **+ Add connection**.
The **Add SSH connection** dialog appears.

::Image[]{src="https://api.archbee.com/api/optimize/mzxtTQEvCNIdUNgF2kuwJ/gPwbGilv8HP051SjM9JUN_image.png" size="40" width="271" height="197" position="center" showCaption="false"}
:::

:::WorkflowBlockItem
Configure the server connection, as described in the table below.
:::

:::WorkflowBlockItem
Click **Apply**.
The configuration will be added to the **Defined Connections** section on the screen.
:::

:::WorkflowBlockItem
Click on the name of the new SSH connection

::Image[]{src="https://api.archbee.com/api/optimize/mzxtTQEvCNIdUNgF2kuwJ/s12kRjrrdHWM5DZa3TO0x_image.png" size="80" width="1280" height="336" position="center" showCaption="false"}
:::

:::WorkflowBlockItem
In the **Remote Source Port** field, specify the port that will be used to connect.
:::

:::WorkflowBlockItem
In the **Local Destination IP** field, specify the IP address of the Zixi Broadcaster.
:::

:::WorkflowBlockItem
In the **Local Destination Port** field, specify the port number in the Zixi Broadcaster for the specific reverse SSH tunnel.
:::

:::WorkflowBlockItem
Click **OK**.
:::
::::

| **Field**                  | **Description**                                                                                                                           |
| -------------------------- | ----------------------------------------------------------------------------------------------------------------------------------------- |
| **Server connection**      |                                                                                                                                           |
| **Host**                   | Specify the Host name or IP address of the remote server for the SSH connection.                                                          |
| **SSH Port**               | Specify the port for the SSH connection.<br />Default: 22                                                                                 |
| **Username**               | Specify the username required for SSH connection.<br />Default: the username on the remote computer is the same as that on the local one. |
| **Key File**               | Indicates if a key file has been uploaded.<br />Click Upload Key to upload a key to the server.                                           |
| **Reverse tunnels**        |                                                                                                                                           |
| **Remote Source Port**     | Specify the remote source port.                                                                                                           |
| **Local Destination IP**   | Specify the IP address of the local destination.                                                                                          |
| **Local Destination Port** | Specify the port number of the local destination.                                                                                         |
| **Status**                 | Specify the status of the SSH tunnel.                                                                                                     |

