---
title: Manual Method
slug: how-to-guides/manual-method
createdAt: 2024-12-18T19:02:42.514Z
---

You can create either a Push input which uses Zixi protocol, or an RTMP input which uses RTMP protocol.

**To add a Push Input to the Broadcaster:**

::::WorkflowBlock
:::WorkflowBlockItem
In Zixi Broadcaster, go to **Inputs**.
:::

:::WorkflowBlockItem
On the **Inputs** screen, click the **+ New Input** button.
The **Add a new input stream** window is displayed.

::Image[]{src="https://api.archbee.com/api/optimize/mzxtTQEvCNIdUNgF2kuwJ/1LVgwJkcgpR9Mugzm04b__image.png" size="80" width="903" height="489" position="center" showCaption="false"}
:::

:::WorkflowBlockItem
In the **Stream ID** field, enter a name that you will use to identify the stream sent from your OnAir app. (Make a note of the precise Stream ID (case sensitive). You will enter this as the *Channel ID* in the OnAir settings.)
:::

:::WorkflowBlockItem
In the stream type selection, select the **Push** radio button (default).
:::

:::WorkflowBlockItem
In the **Stream Parameters** section, if you would like to add a password in order to increase security, enter a password in the **Password** field. (*Make a note of the precise Password* (case sensitive). You will enter this as the *Password* in the OnAir settings.)
:::

:::WorkflowBlockItem
Configure additional settings as necessary.
:::

:::WorkflowBlockItem
Click **OK**.
The “Input added” message appears on the top of the screen.
:::
::::

The new Input is added to the Zixi Broadcaster and now appears in the list of streams available on the Inputs screen. The **Status** should be *Offline&#x20;*(blue).

::Image[]{src="https://api.archbee.com/api/optimize/mzxtTQEvCNIdUNgF2kuwJ/YU8VIOK_ryGxCAtN7MMyL_image.png" size="80" width="1167" height="324" position="center" showCaption="false"}



**To add an RTMP Input to the Broadcaster:**

::::WorkflowBlock
:::WorkflowBlockItem
In Zixi Broadcaster, go to **Inputs**.
:::

:::WorkflowBlockItem
On the **Inputs** screen, click the **+ New** Input button.
The **Add a new input stream** window is displayed.
:::

:::WorkflowBlockItem
In the **Stream ID** field, enter a name that you will use to identify the stream sent from your OnAir app. (Make a note of the precise Stream ID (case sensitive). You will enter this as the *Channel ID* in the OnAir settings.)
:::

:::WorkflowBlockItem
In the stream type selection, select the **RTMP** radio button.
:::

:::WorkflowBlockItem
In the **Type** field, select **Push**.
:::

:::WorkflowBlockItem
Configure additional settings as necessary.
:::

:::WorkflowBlockItem
Click **OK**.
The new Input is added to the Zixi Broadcaster and now appears in the list of streams available on the Inputs screen. The **Status** should be *Offline* (blue).

::Image[]{src="https://api.archbee.com/api/optimize/mzxtTQEvCNIdUNgF2kuwJ/g83yt49nCcEfcPpSOO6Zb_image.png" size="80" width="1168" height="286" position="center" showCaption="false"}
:::
::::

